高技术条件下炮兵作战火力优化模型

由于能给敌军造成大量的毁伤 ,炮兵被誉为“战争之神”。但是 ,由于可得到的炮兵部队数量、弹药和时间所限 ,炮兵不可能对战场所有可得到的目标射击。炮兵必须决定哪些目标可用炮兵射击 ,以及如何射击。考虑到未来战场将充斥着大量目标 ,炮兵要求使用一种自动目标处理系统。将提出一个炮兵优化模型 ,模型的目的是快速对目标价值排序 ,然后以最佳的炮兵兵力、火力分配对选择的目标进行射击。     

开口电极在海水中的电场特性研究

利用稳恒电磁场理论,通过基本假设和单个电极电场计算公式的推导,计算了某一深度平面的电场值,绘制了平面分布图。接着利用相似理论进行了模型缩比实验,测量了二电极电场在某一平面上的分布值,绘制了平面分布图,进行了基本特性分析。该结果对进行船舶电场模拟和海缆断点探寻等工作,具有很好的参考价值。     

Effect of tool rotational speed on the particle distribution in friction stir welding of AA6092/17.5 SiCp-T6 composite plates and its consequences on the mechanical property of the joint

This study investigates the effect of tool rotational speed (TRS) on particle distribution in nugget zone (NZ) through quantitative approach and its consequences on the mechanical property of friction stir welded joints of AA6092/17.5 SiC_p-T6 composite. 6 mm thick plates are welded at a constant tool tilt angle of 2° and tool traverse speed of 1 mm/s by varying the TRS at 1000 rpm, 1500 rpm and 2000 rpm with a taper pin profiled tool. Microstructure analysis shows large quantity of uniformly shaped smaller size SiC particle with lower average particle area which are homogeneously distributed in the NZ. The fragmentation of bigger size particles has been observed because of abrading action of the hard tool and resulting shearing effect and severe stress generation due to the rotation of tool. The particles occupy maximum area in the matrix compared to that of the base material (BM) due to the redistribution of broken particles as an effect of TRS. The migration of particles towards the TMAZ-NZ transition zone has been also encountered at higher TRS (2000 rpm). The microhardness analysis depicts variation in average hardness from top to bottom of the NZ, minimum for 1500 rpm and maximum for 2000 rpm. The impact strength at 1000 rpm and 1500 rpm remains close to that of BM (21.6 J) while 2000 rpm shows the accountable reduction. The maximum joint efficiency has been achieved at 1500 rpm (84%) and minimum at 1000 rpm (68%) under tensile loading. Fractographic analysis shows mixed mode of failure for BM, 1000 rpm and 1500 rpm, whereas 2000 rpm shows the brittle mode of failure.     

Experimental investigation on dynamic response and damage models of circular RC columns subjected to underwater explosions

Reinforced concrete (RC) columns are widely used as supporting structures for high-piled wharfs. The study of damage model of a RC column due to underwater explosion is a critical issue to assess the wharf’s antiknock security. In this study, the dynamic response and damage model of circular RC columns subjected to underwater explosions were investigated by means of scaled-down experiment models. Experiments were carried out in a 10.0 m diameter tank with the water depth of 2.25 m, under different explosive quantities (0.025 kg–1.6 kg), stand-off distances (0.0 m–7.0 m), and detonation depths (0.25 m–2.0 m). The shock wave load and dynamic response of experiment models were measured by configuring sensors of pressure, acceleration, strain, and displacement. Then, the load distribution characteristics, time history of test data, and damage models related to present conditions were obtained and discussed. Three damage models, including bending failure, bending-shear failure and punching failure, were identified. In addition, the experience model of shock wave loads on the surface of a RC column was proposed for engineering application.     

Consecutive k‐within‐m‐out‐of‐n:F system with exchangeable components

As a generalization of k‐out‐of‐n:F and consecutive k‐out‐of‐n:F systems, the consecutive k‐within‐m‐out‐of‐n:F system consists of n linearly ordered components such that the system fails iff there are m consecutive components which include among them at least k failed components. In this article, the reliability properties of consecutive k‐within‐m‐out‐of‐n:F systems with exchangeable components are studied. The bounds and approximations for the survival function are provided. A Monte Carlo estimator of system signature is obtained and used to approximate survival function. The results are illustrated and numerics are provided for an exchangeable multivariate Pareto distribution. © 2009 Wiley Periodicals, Inc. Naval Research Logistics 2009     

Statistical analysis of exponential lifetimes under an adaptive Type‐II progressive censoring scheme

In this article, a mixture of Type‐I censoring and Type‐II progressive censoring schemes, called an adaptive Type‐II progressive censoring scheme, is introduced for life testing or reliability experiments. For this censoring scheme, the effective sample size m is fixed in advance, and the progressive censoring scheme is provided but the number of items progressively removed from the experiment upon failure may change during the experiment. If the experimental time exceeds a prefixed time T but the number of observed failures does not reach m, we terminate the experiment as soon as possible by adjusting the number of items progressively removed from the experiment upon failure. Computational formulae for the expected total test time are provided. Point and interval estimation of the failure rate for exponentially distributed failure times are discussed for this censoring scheme. The various methods are compared using Monte Carlo simulation. © 2009 Wiley Periodicals, Inc. Naval Research Logistics, 2009     

空降兵师(团)登岛作战兵力分配模型

通过结合空降兵师(团)级登岛作战的战术特点,确立了遮断点的单点和联合价值的指标体系,建立了以联盟博弈为基础的兵力分配初步模型,然后以Shapley值作为此联盟博弈的解,结合投放过程中的兵力损耗,得到一个合理的兵力分配方案,从而建立了师(团)级空降登岛作战的兵力分配模型和算法.     

基于正态分布曲线的分段式变步长LMS算法

针对传统最小均方误差(Least Mean Square, LMS)自适应滤波算法由于步长固定,在解决稳态误差与收敛性之间的关系时,始终处于矛盾状态的问题,在对传统的固定步长LMS自适应滤波算法分析的基础上,根据变步长LMS自适应滤波算法的步长调整原则,通过构造步长因子与误差信号的非线性函数,提出了一种基于正态分布曲线的分段式变步长LMS自适应滤波算法,并分析了参数取值对算法性能的影响。针对实际信号处理过程中参考信号难以选取的问题,提出了一种基于分裂阵的参考信号选取方法。理论和海试数据分析结果表明:该算法的收敛速度和稳态误差明显优于固定步长的LMS自适应滤波算法和基于Sigmoid函数的变步长LMS自适应滤波算法。     

Fragment spatial distribution of prismatic casing under internal explosive loading

Non-cylindrical casings filled with explosives have undergone rapid development in warhead design and explosion control. The fragment spatial distribution of prismatic casings is more complex than that of traditional cylindrical casings. In this study, numerical and experimental investigations into the fragment spatial distribution of a prismatic casing were conducted. A new numerical method, which adds the Lagrangian marker points to the Eulerian grid, was proposed to track the multi-material interfaces and material dynamic fractures. Physical quantity mappings between the Lagrangian marker points and Eulerian grid were achieved by their topological relationship. Thereafter, the fragment spatial distributions of the prismatic casing with different fragment sizes, fragment shapes, and casing geometries were obtained using the numerical method. Moreover, fragment spatial distribution experiments were conducted on the prismatic casing with different fragment sizes and shapes, and the experimental data were compared with the numerical results. The effects of the fragment and casing geometry on the fragment spatial distributions were determined by analyzing the numerical results and experimental data. Finally, a formula including the casing geometry parameters was fitted to predict the fragment spatial distribution of the prismatic casing under internal explosive loading.     

不同分散剂对纳米SiO_2水中分散的影响

选取六偏磷酸钠(SHMP)、十二烷基苯磺酸钠(SDBS)及KCl作分散剂,并采用超声分散方法,制备纳米SiO2悬浮液,对纳米SiO2的水中分散性能进行研究。测试分散体系中纳米SiO2粒子的粒径及分布、Zeta电位及透光率,探讨了不同分散剂对纳米SiO2分散性能的影响。结果表明:不同分散剂对纳米SiO2的粒径都有明显影响,但粒径分布宽度差别较大;同在分散粒径较小的条件下,分别添加3种分散剂的悬浮液体系具有不同的稳定性,其中含SDBS的分散体系因静电和空间位阻的作用而表现出良好的分散稳定性。